04-09-11: Fiberglassing the inside of the hull

After sanding with the angle grinder I sanded again by hand a couple of times - Hard work!

In the evening I prepared to fiberglas the inside of the deck and hull. I layed out the fiberglas cloth and hold it in place with a few pegs.

I have no pictures of the process. It was a bit of a tease because of the narrow angle in the bow and stern. When trying to distribute the epoxy I pulled the cloth out of the bow and stern. But with a lot of patience I finally got it done. I had figured it would take about an hour but it took a lot more than that.